LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Swing Gate) >> Check Strap >> Installation

Check Strap: Installation

WARNING: This page is about a different car, the 2003 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the check strap.
  2. Install the nuts and tighten to 10 N.m (89 in. lbs.).
  3. Reposition the waterdam.
  4. Install the trim panel. (Refer to INSTALLATION  ).
  5. Install the bolts attaching the check strap to the d-pillar and tighten to 11 N.m (8 ft. lbs.).
  6. Install the quarter trim panel. (Refer to INTERIOR ).
scientia non olet · About LEMON Manuals