Quarter Window: Installation
CAUTION:
Open a window before installing glass. This will avoid pressurizing the passenger compartment. If a door or liftgate is slammed before urethane is cured, water leaks can result.
The window opening fence should be cleaned of old urethane bonding material.
- Clean inside of glass with Mopar Glass Cleaner and lint-free cloth.
- Apply clear PVC (vinyl) primer 25 mm (1 in.) wide around edge of glass. Wipe with clean/dry lint-free cloth.NOTE: Make sure primer does not flow passed the black frit.
- Apply black primer 25 mm (1 in.) wide around edge of glass. Allow at least eighteen minutes, drying time.
- Apply a 16 mm (0.6 in.) high by 10 mm (0.4 in.) wide triangular bead of urethane around window vinyl border location.
- Position glass into window opening and lock the four clips into place.