LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Liberty Limited, 4WD, Part Time, 42RLE >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Fuel System) >> Fuel Level Sending Unit/Sensor >> Installation

Fuel Level Sending Unit/Sensor: Installation

WARNING: This page is about a different car, the 2004 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect necessary wiring into electrical connectors. Connect 4-wire connector to upper section of pump module.
  2. Position sending unit to pump module. Slide and snap into place.
  3. Install lower section of fuel pump module. Refer to FUEL PUMP MODULE .
scientia non olet · About LEMON Manuals