LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Grand Cherokee Overland >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Brake System - Abs) >> ICU (Integrated Control Unit) >> Assembly

ICU (Integrated Control Unit): Assembly

WARNING: This page is about a different car, the 2003 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the CAB on the HCU lining up the solenoids with the valves.
  2. Install the 4 bolts mounting the CAB to the HCU (Figure ). Tighten the CAB mounting bolts to a torque of 2 N.m (17 in. lbs.).
  3. Plug the pump/motor wiring harness into the CAB (Figure ).
  4. Install the ICU in the vehicle. (Refer to INSTALLATION  ).
scientia non olet · About LEMON Manuals