LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Grand Cherokee Overland >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Front Seat Back >> Installation

Front Seat Back: Installation

  1. Position seat back on seat cushion.
  2. Route the power lumber and heater harness through the seat cushion cover, if equipped.
  3. Install recliner bolts attaching seat back frame to seat cushion frame and tighten to 28 N.m (20 ft. lbs.).
  4. Install the inboard bolt attaching seat back frame to seat cushion frame and tighten to 47 N.m (35 ft.lbs.).
  5. Connect wire harness connector to recliner motor and/or heated seat, if equipped.
  6. From the underside of the seat, connect the power lumber and/or heated seat wire harness connector to the seat harness, if equipped.
  7. Install screws attaching seat side shield to seat frame.
scientia non olet · About LEMON Manuals