Ignition Timing
NOTE:
Engines are equipped with a receptacle for a magnetic probe timing light, located 9.5° ATDC. Do not use this location for timing with a conventional light.
Warm engine and allow to idle. Disconnect and plug distributor vacuum line, then check ignition timing. Adjust by turning distributor.
TIMING SPECIFICATIONS (Degrees BTDC@RPM)
| Application | Man. Trans. | Auto Trans. | |
|---|---|---|---|
| All Models | |||
| High Alt. | 6-18@600 | 16-18@600 | |
| All Other | 9-11@600 | 9-11@600 | |