Transmission Fluid Drain & Refill: Drain
- Raise and support the vehicle.
- Place a suitable container under the transmission.
- Using the special tool, remove the transmission fluid filler plug.
- Remove and discard the sealing washer.
- Remove the transmission fluid drain plug.
- Remove and discard the sealing washer.
- Install the transmission fluid drain plug.
- Install the new sealing washer.
- Tighten to 8 Nm.
See Fig 2.
NOTE:
If an internal problem is suspected, drain the transmission fluid through a paper filter. A small amount of metallic particles may be found from normal wear. However, if excessive metallic particles are present, internal inspection may be required.