Section 131 (Safety Belt System): Specifications: Torques
WARNING: This page is about a different car, the 2003 Jaguar XJR, 2003 Jaguar XJ8, 2002 Jaguar XJR, and 2002 Jaguar XJ8. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| Component | Nm |
|---|---|
| Screws, front seat belt height adjuster to B/C post LH and RH | 24 - 26 |
| Nut, seat belt upper anchor to height adjuster LH and RH | 30 - 40 |
| Bolt, LH and RH rear seat belt lower anchor to body | 30 - 40 |
| Bolt, center rear seat belt lower anchor to body | 30 - 40 |
| Bolts, rear seat belt automatic locking retractor LH, RH and center to squab panel | 30 - 40 |
| Bolt, rear seat belt buckle LH, RH and center to body | 30 - 40 |
| Bolt, front seat belt buckle LH and RH to seat rail | 30 - 40 |
| Bolt, front seat belt lower anchor LH and RH to seat rail | 30 - 40 |
| Bolts, front seat belt automatic locking retractor/pretensioner to B post | 30 - 40 |
| Bolts, side airbag to seat frame | 9 - 11 |
| Screws, front seat belt guide to B/C post | 8 - 10 |
| Screws, single point sensor to tunnel | 5 - 7 |
| Screws, side impact sensing module to 'B' post | 5 - 7 |