LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2002 >> Rodeo LS, 2.2 D >> Repair and Diagnosis >> Engine Performance >> Ignition System (Y22SE 2.2L) >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

  1. Disconnect battery ground cable.
  2. Wiring connector from crankshaft angle sensor.
  3. Remove crankshaft position sensor from cylinder block.
    Fig 1: Removing Crankshaft Position Sensor
    G03323809
scientia non olet · About LEMON Manuals