LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> QX30 Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Introduction, Wiring Diagrams And Basic Inspection) >> Basic Inspection >> Additional Service When Replacing Control Valve >> Work Procedure (After Replace Control Valve)

Work Procedure (After Replace Control Valve)

  1. PERFORM OIL LEVEL CHECK

    G-20 With CONSULT

    1. Select "Work Support" in "TRANSMISSION".
    2. Perform "Oil level check".

    GO TO STEP 2  .

  2. PERFORM NORMALIZATION AND ADAPTATION

    G-20 With CONSULT

    1. Select "Work Support" in "TRANSMISSION".
    2. Perform "Normalization and adaptation".

    WORK END

scientia non olet · About LEMON Manuals