LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> G37 Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Manual Transmission (Convertible)) >> Unit Disassembly And Assembly >> Shift Fork And Fork Rod >> Assembly >> Check Shift Pin

Check Shift Pin

WARNING: This page is about a different variant/trim than selected.
  1. Set the control bracket to a vise and then install check shift pin (1) to control bracket.
  2. Tighten check shift pin to the specified torque.
    Fig 1: Removing/Installing Check Shift Pin Using Vise
    G05973300Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals