Component Function Check
WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select "AUTOMATIC BACK DOOR CONTROL UNIT" using CONSULT-III.
- Select "HALF LATCH SW" in "DATA MONITOR" mode.
- Check that the function operates normally according to the following conditions.MONITOR ITEM CONDITION
Monitor item Condition Status HALF LATCH SW Back door Fully closed/Half latch OFF Open ON Is the inspection result normal?
YES: Half latch switch is OK.
NO: Refer to "DIAGNOSIS PROCEDURE ".