Component Function Check
WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select "AUTOMATIC BACK DOOR CONTROL UNIT" using CONSULT-III.
- Select "DESTINATION" and "HAZARD" in "DATA MONITOR" mode.
- Check that the function operates normally according to the following conditions.MONITOR ITEM CONDITION
Monitor item Condition Status DESTINATION Circuit between automatic back door control module terminal 22 and ground Normal NAM Open or short JPN HAZARD Circuit between automatic back door control module terminal 23 and ground Normal ON Open or short OFF Is the inspection result normal?
YES: Automatic back door ground circuit is OK.
NO: Refer to "DIAGNOSIS PROCEDURE ".