SYSTEM SETTING : Special Repair Requirement

There are three way of setting method.

Which method do you choose? 

With set switch: GO TO 2.

With CONSULT-III: GO TO  4.

1. Turn ignition switch OFF.
2. Push setting button and hold for more than 10 seconds, then confirm blinking of the memory switch indicator.
   • Entry/exit assist (seat/steering column) are ON: Memory switch indicator blink two times.
   • Entry/exit assist (seat/steering column) are OFF: Memory switch indicator blink once.

     GO TO 3.

1. Turn ignition switch ACC.
2. Push setting button and hold for more than 10 seconds, then confirm blinking of the memory switch indicator.
   • Synchronization are ON: Memory switch indicator blink two times.
   • Synchronization are OFF: Memory switch indicator blink once.

     END

Select "Work support".

GO TO 5.

1. Select "EXIT SEAT SLIDE SETTING", "EXIT TILT SETTING" or "SEAT SLIDE VOLUME SET" then touch display to change between ON and OFF.
   • EXIT SEAT SLIDE SETTING: Entry/exit assist (seat)
   • EXIT TILT SETTING: Entry/exit assist (steering column)
2. Then touch "OK".

   END