LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> M35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Door Lock) >> Wireless Door Lock Control System >> Data List / Active Test

Data List / Active Test

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. READ DATA LIST 

    HINT:

    Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Turn the tester ON.
    4. Enter the following menus:

      Techstream - Select: Body Electrical / Main Body / Data List.

    5. Check the results by referring to the table below.
      1. Techstream

        Main body 

        TECHSTREAM DATA LIST - MAIN BODY

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        D Door Courtesy SW Driver side door courtesy light switch signal / ON or OFF ON: Driver side door is open
        OFF: Driver side door is closed        		 -
        P Door Courtesy SW Passenger side door courtesy light switch signal / ON or OFF ON: Passenger side door is open
        OFF: Passenger side door is closed        		 -
        RR Door Courtesy SW*1, *2 Rear door RH courtesy light switch signal / ON or OFF ON: Rear door RH is open
        OFF: Rear door RH is closed        		 -
        RL Door Courtesy SW*1, *2 Rear door LH courtesy light switch signal / ON or OFF ON: Rear door LH is open
        OFF: Rear door LH is closed        		 -
        D-Door Lock Pos SW Driver side door unlock detection switch signal / ON or OFF ON: Driver side door is unlocked
        OFF: Driver side door is locked        		 -
        P-Door Lock Pos SW Passenger side door unlock detection switch signal / ON or OFF ON: Passenger side door is unlocked
        OFF: Passenger side door is locked        		 -
        RR-Door Lock Pos SW*1, *2 Rear door RH lock position switch signal / ON or OFF ON: Rear door RH is unlocked
        OFF: Rear door RH is locked        		 -
        RL-Door Lock Pos SW*1, *2 Rear door LH unlock detection switch signal / ON or OFF ON: Rear door LH is unlocked
        OFF: Rear door LH is locked        		 -
        Door Lock SW-Lock Door manual lock switch signal / ON or OFF ON: Door control switch (for driver side door) is turned to lock position
        OFF: Door control switch (for driver side door) is turned to unlock position        		 -
        Door Lock SW-Unlock Door manual unlock switch signal / ON or OFF ON: Door control switch (for driver side door) is turned to unlock position
        OFF: Door control switch (for driver side door) is turned to lock position        		 -
        Door Key SW-Lock Door key linked lock switch signal / ON or OFF ON: Driver side door key cylinder is turned to lock position
        OFF: Driver side door key cylinder is turned to unlock position        		 -
        Door Key SW-Unlock Door key linked unlock switch signal / ON or OFF ON: Driver side door key cylinder is turned to unlock position
        OFF: Driver side door key cylinder is turned to lock position        		 -
        Key Unlock Warning SW Unlock warning switch / ON or OFF ON: Ignition key is inserted
        OFF: Ignition key is not inserted        		 -
        HINT:
        • *1: for Double Cab
        • *2: for CrewMax
  2. PERFORM ACTIVE TEST 

    HINT:

    Using the Techstream to perform Active Tests allows relays, VSVs and actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Enter the following menus:

      Techstream - Select: Body Electrical / Main Body / Active Test.

    4. Perform the Active Test by referring to the table below.
      1. Techstream

        Main body 

        TECHSTREAM ACTIVE TEST - MAIN BODY

        Tester Display Test Part Control Range Diagnostic Note
        Wireless buzzer Sounds wireless buzzer ON or OFF -
        Hazard Flasher relay ON or OFF -
        Vehicle Horn Sounds vehicle horn ON or OFF -
        Security Horn Sounds security horn ON or OFF -
        Door Lock Operate door lock motor LOCK or UNLOCK -
        D-Door Unlock Operate driver side door lock motor unlock ON or OFF -
scientia non olet · About LEMON Manuals