Diagnosis Procedure

WARNING:

Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait at least 3 minutes. To discharge backup capacitor)
Never use unspecified tester or other measuring device.

CHECK FRONT SIDE AIR BAG MODULE
Check front side air bag module.

Is the front side air bag module deployed?

YES: Replace front side air bag module. Refer to "EXPLODED VIEW ".

NO: GO TO 2.
CHECK SIDE CURTAIN AIR BAG MODULE
Check side curtain air bag module.

Is the side curtain air bag module deployed?

YES: Replace side curtain air bag module. Refer to "EXPLODED VIEW ".

NO: GO TO 3.
CHECK SATELLITE SENSOR
Check satellite sensor.

Is the front side air bag module and/or side curtain air bag module deployed?

YES: Replace satellite sensor. Refer to "EXPLODED VIEW ".

NO: GO TO 4.
CHECK AIR BAG DIAGNOSIS SENSOR UNIT
Check air bag diagnosis sensor unit.

Is the front side air bag module and/or side curtain air bag module deployed?

YES: Replace air bag diagnosis sensor unit. Refer to "EXPLODED VIEW ".

NO: GO TO 5.
CHECK WIRING HARNESS/HARNESS CONNECTOR
Check wiring harness/harness connector.

Is the wiring harness/harness connector normal?

YES: GO TO 6.

NO: Replace wiring harness/harness connector.
FINAL CHECK
Perform "AIR BAG" Self Diagnostic Result with CONSULT-III and/or Air bag warning lamp status.

Is the inspection result normal?

YES: INSPECTION END

NO: Check the intermittent incident. Refer to "INTERMITTENT INCIDENT ".