Diagnostic Procedure
- Check the following if "CAN COMM CIRCUIT [U1000]" is detected in self-diagnosis results of CONSULT-III.
- CHECK CAN COMMUNICATION CIRCUIT
With CONSULT-III
- Turn ignition switch "ON" and start engine.
- Select "SELF-DIAG RESULTS" mode for "ALL MODE AWD/4WD" with in CONSULT-III.
- Perform the self-diagnosis.
Is the "CAN COMM CIRCUIT [U1000]" displayed?
Yes: Print out CONSULT-III screen and go to CAN SYSTEM SPECIFICATION TABLE .
No: INSPECTION END