LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> G35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Automatic Drive Positioner) >> Function Diagnosis >> Automatic Drive Positioner System >> Entry Assist Function >> ENTRY ASSIST FUNCTION : System Description >> Detail Flow

Detail Flow

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
DETAIL FLOW

Order Input Output Control unit condition
1 Door switch/Ignition switch - Driver seat control unit receives the signals of ignition switch signal and front door switch from BCM via CAN communication.
2 - Motors (sliding, tilt) Driver seat control unit operates the sliding motor when the operating conditions are satisfied. Driver seat control unit then requests the operation of the tilt motor to the automatic drive positioner control unit via UART communication. The automatic drive positioner control unit operates the motor for a constant amount.
Sensors (sliding, tilt) - Sensors monitor the operating positions of seat and steering wheel and then stops the operation of each motor when each part reaches the recorded address.
scientia non olet · About LEMON Manuals