LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> G35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Automatic Drive Positioner) >> Function Diagnosis >> Automatic Drive Positioner System >> Entry Assist Function >> ENTRY ASSIST FUNCTION : Component Description >> Control Units

Control Units

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
ITEM FUNCTION CHART

Item Function
Driver seat control unit According to the ignition signal and front door switch LH signal from BCM,
  • Operates the seat sliding motor for a constant amount.
  • Driver seat control unit then requests the operation of the tilt motor to the automatic drive positioner control unit via UART communication.
Automatic drive positioner control unit Operates the tilt motor for a constant amount.
BCM Recognizes the following status and transmits it to the driver seat control unit via CAN communication.
  • Front door LH: OPEN/CLOSE
  • Ignition switch position: ACC/ON
scientia non olet · About LEMON Manuals