DRIVER SIDE : Component Function Check

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "MIR/SEN LH U-D", "MIR/SEN LH R-L" in "Data monitor" with CONSULT-III.

Check mirror sensor (driver side) signal under the following condition.

MONITOR ITEM VALUE CHART

Monitor item	Condition		Value
MIR/SEN LH U-D	Door mirror LH	Close to peak	3.4V
MIR/SEN LH U-D		Close to valley	0.6V
MIR/SEN LH R-L		Close to right edge	3.4V
MIR/SEN LH R-L		Close to left edge	0.6V

Is the indication normal?

YES: INSPECTION END

NO: Perform diagnosis procedure. Refer to "DRIVER SIDE : DIAGNOSIS PROCEDURE ".