LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> G35 Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass & Window System >> On-Vehicle Repair >> Front Regulator >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove the front door finisher. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the corner cover.
  3. Remove the door speaker.
  4. Operate the power window main switch to raise/lower the door window until the glass mounting bolts can be seen.
  5. Remove the glass mounting bolts.
    Fig 1: Locating Glass Mounting Bolts
    G05224656Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Raise up the door glass and hold with a suction lifter.
  7. Disconnect the harness connector for the module assembly, and remove the harness clip.
  8. Remove the module assembly mounting bolts.
  9. Remove the module assembly.
    Fig 2: Locating Module Assembly Mounting Bolts
    G05224660Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals