Component Inspection

1. Turn ignition switch OFF.
2. Disconnect front door lock assembly (driver side) (key cylinder switch) connector.
3. Check front door lock assembly (driver side) (key cylinder switch).
   CONTINUITY SPECIFICATION
   
   

   Front door lock assembly (driver side) (key cylinder switch)			Key position	Continuity
   Connector	Terminal
   D15	5	4	Unlock	Existed
   			Neutral / Lock	Not existed
   	6		Lock	Existed
   			Neutral / Unlock	Not existed

Is the inspection result normal? 

YES: INSPECTION END

NO: Replace front door lock assembly (driver side) (key cylinder switch). Refer to REMOVAL AND INSTALLATION .