Diagnosis Procedure

Check VDC OFF switch. Refer to COMPONENT INSPECTION  .

Is the inspection result normal? 

YES: GO TO  2.

NO: VDC OFF switch is malfunctioning. Replace VDC OFF switch.

1. Disconnect ABS actuator and electric unit (control unit) connector.
2. Disconnect VDC OFF switch connector.
3. Check the continuity between VDC OFF switch connector and ABS actuator and electric unit (control unit) connector.
   TERMINALS CONTINUITY REFERENCE
   
   

   ABS actuator and electric unit (control unit)		VDC OFF switch		Continuity
   Connector	Terminal
   E41	31	M19	1	Existed

4. Check the continuity between ABS actuator and electric unit (control unit) harness connector and ground.
   TERMINALS CONTINUITY REFERENCE
   
   

   ABS actuator and electric unit (control unit)		-	Continuity
   Connector	Terminal
   E41	31	Ground	Not existed

5. Check the continuity between VDC OFF switch harness connector and ground.

Is the inspection result normal? 

YES: GO TO  3.

NO: If the open or short in harness, repair or replace harness.

1. Connect ABS actuator and electric unit (control unit) connector.
2. Connect VDC OFF switch connector.
3. Check the indication and operation of combination meter are normal. Refer to DIAGNOSIS DESCRIPTION .

Is the inspection result normal? 

YES: INSPECTION END

NO: Repair or replace combination meter.