Terminals and Reference Values for Back Door Control Unit

TERMINALS AND REFERENCE VALUES FOR BACK DOOR CONTROL UNIT

Terminal	Wire Color	Item	Condition	Voltage (V) (Approx.)
1	B	Ground	-	-
2	B	Ground	-	-
3	Y/R	Battery power supply	-	Battery voltage
4	G	Hazard lamp output	Request to flash hazards	50ms > Pulse must be > 250ms
5	B/P	Pinch strip ground	-	-
6	R	Warning chime output	Back door motor active	Battery voltage
7	G/R	Ignition switch	Ignition switch ON	Battery voltage
			Ignition switch OFF	0
8	GR/B	Back door close switch	CLOSE position (ON)	0
			NEUTRAL position (OFF)	Battery voltage
9	L	Warning chime ground	-	-
10	L/B	Battery power supply	-	Battery voltage
11	Y	Cinch latch motor CLOSE output	Back door close operation	Battery voltage
12	L	Closure motor RETURN output	Back door release operation	Battery voltage
13	P/L	Back door close switch	CANCEL position	0
			NEUTRAL position	5
14	P	Close switch signal	While fully opening back door
15	O/L	Open switch signal	While fully closing back door
17	GR	Glass hatch ajar signal	Glass hatch OPEN	0
			Glass hatch CLOSED	5
18	GR/R	Park switch	P or N position (Ignition is ON)	0
			Other (Ignition is ON)	9
19	BR/B	Pinch strip RH	Detecting obstruction	0
			Other	5
20	V/G	Pinch strip LH	Detecting obstruction	0
			Other	5
21	W/V	Power window serial link	-
22	BR	Half switch signal	Back door half latch position
23	L/W	Power liftgate switch	ON	0
			OFF	5
26	V	Back door handle switch signal	Handle operation	0
			Other	Battery voltage