LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2007 >> M35 Base >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Disassembly and Assembly >> Assembly >> Front Drive Shaft and Drive Chain

Front Drive Shaft and Drive Chain

  1. Install front drive shaft front bearing, using the drift.

    Tool number : ST33200000 (J-26082) 

    Fig 1: Identifying Front Drive Shaft Front Bearing Installation Position
    G05225379
  2. Install front drive shaft rear bearing, using the drift.

    Tool number : KV38104010 ( - ) 

    Fig 2: Identifying Front Drive Shaft Rear Bearing Installation Position
    G05225380
  3. Install drive chain to front drive shaft.
    CAUTION: Identification mark of drive chain should be in the side of front bearing of front drive shaft.
    Fig 3: Identifying Mark Of Drive Chain
    G05225381
  4. Install drive chain to mainshaft, and then install tap front drive shaft with plastic hammer. Press-fit rear bearing of front drive shaft to rear case.
    CAUTION: Be careful not to tap drive chain.
  5. Install front case to rear case. Refer to "FRONT CASE AND REAR CASE ".
    Fig 4: Tapping Front Drive Shaft With Plastic Hammer
    G05225363
scientia non olet · About LEMON Manuals