LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson Value, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Immobilizer System) >> Immobilizer Control Unit >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the main crash pad assembly.

    (Refer to Body - "MAIN CRASH PAD ASSEMBLY ")

  3. Disconnect the connector (B) of the immobilizer unit and then remove the immobilizer unit (A) after loosening a bolt.
Fig 1: Disconnecting Connector Of Immobilizer Unit
G12043319Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals