LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Santa Fe XL Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Front Suspension System And Wheel Alignment) >> Front Strut Assembly >> Repair Procedures >> Inspection >> Disposal

Repair Procedures: Inspection: Disposal

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe XL and 2017 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully extend the piston rod.
  2. Drill a hole on the A section to remove gas from the cylinder.
    G12032905Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION: The gas coming out is harmless, but be careful of chips that may fly when drilling.
    Be sure to wear safety goggles or eye protection when performing this task.
scientia non olet · About LEMON Manuals