LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra Value Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Heater System) >> Mode Control Actuator >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the main crash pad assembly.

    (Refer to Body - "MAIN CRASH PAD ASSEMBLY ")

  3. Disconnect the connector (A) and then remove the mode control actuator (B) after loosening the mounting screws.
    Fig 1: Locating Mode Control Actuator And Connector
    G12024313Courtesy of HYUNDAI MOTOR AMERICA
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals