LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra GT Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (Clutch System) >> Concentric Slave Cylinder Assembly >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • Install the concentric slave cylinder bolts. Not to be bent or twisted, Tighten them in diagonal directions.
  • When it is assembled, it must be free from invasive foreign matters and oil leakage.
  1. To install, reverse the removal procedure.
  2. Perform Bleeding Air Procedure in Concentric Slave Cylinder after pouring the Brake Fluid.

    (Refer to Concentric Slave Cylinder Assembly - "ADJUSTMENT ")

scientia non olet · About LEMON Manuals