LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 130 (Power Windows (HEV)) >> Power Window Switch >> Repair Procedures >> Removal >> Driver Power Window Switch

Driver Power Window Switch

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
  • When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.
  • Be careful to store and handle the trim when removing/installing because lubricant and oil can leave a stain on the trim.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door trim.

    (Refer to "FRONT DOOR TRIM ")

  3. Remove the power window switch assembly after disengaging the retaining clips.
Fig 1: Removing Power Window Switch Assembly Retaining Clips (1 Of 2)
G12062884Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Removing Power Window Switch Assembly Retaining Clips (2 Of 2)
G12062885Courtesy of HYUNDAI MOTOR AMERICA

Information 

Fig 3: Locating Power Window Switch Assembly Damaged Clips (1 Of 2)
G12062886Courtesy of HYUNDAI MOTOR AMERICA
Fig 4: Locating Power Window Switch Assembly Damaged Clips (2 Of 2)
G12062887Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals