LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2017 >> Elantra Value Edition >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Idle Stop And Go (ISG) System) >> Brake Switch >> Repair Procedures >> Inspection >> GDS Data Analysis

GDS Data Analysis

WARNING: This page is about a different variant/trim than selected.
  1. Analyze GDS data and confirm if there is anything wrong with the stop lamp switch.
    1. Connect the GDS to the self-diagnosis connector.
    2. Turn the spark switch on
    3. Step on the brake pedal.
    4. Inspect the "brake switch" category that displays the "sensor data" GDS.

      Normal waveform:  The pressure sensor signal value will change according to the brake ON/OFF switch.

    Fig 1: Scantool Display - Normal Waveform
    G12020788Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals