Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

Remove the battery.
(Refer to: Engine Electrical System - "BATTERY ").
Disconnect the vehicle speed sensor (A).

Fig 1: Identifying Vehicle Speed Sensor
Courtesy of HYUNDAI MOTOR AMERICA
Remove the vehicle speed sensor (A).
Tightening Torque:

5.9 ~ 7.8 N.m (0.6 ~ 0.8 kgf.m, 4.3 ~ 5.8 lb-ft)

Fig 2: Removing Vehicle Speed Sensor
Courtesy of HYUNDAI MOTOR AMERICA
CAUTION:
- After removing speed sensor, be careful not to enter dust, foreign matters, etc. in speed sensor hole.
- Check the wear of spline (A).
- When installing, do not reuse the O-ring (B).
Fig 3: Installing O-Ring
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.