LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Veracruz Limited, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System Diagnosis >> DTC P1752: RL Wheel Speed Sensor >> Scan Tool Diagnostics >> Scan Tool Diagnostics >> Monitor Scan Tool Data

Monitor Scan Tool Data

  1. Connect scan tool to data link connector (DLC)
  2. Engine "ON".
  3. Monitor the "CAN COMMUNICATION SERVICE DATA (ENGINE RPM, VEHICLE SPEED SENSOR, THROTTLE P. SENSOR)" parameters on the scan tool
    Fig 1: Monitoring CAN Communication Service Data (Engine RPM, Vehicle Speed Sensor, Throttle P. Sensor) Parameters On Scan Tool - Low-RPM
    G06861222Courtesy of HYUNDAI MOTOR CO.
    Fig 2: Monitoring CAN Communication Service Data (Engine RPM, Vehicle Speed Sensor, Throttle P. Sensor) Parameters On Scan Tool - High-RPM
    G06861223Courtesy of HYUNDAI MOTOR CO.
  4. Does "CAN BUS LINE DATA" follow the reference data?

    YES

    1. Fault is intermittent caused by poor contact in the sensor's and/or TCM (PCM)'s connector or was repaired and TCM (PCM) memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration or damage. Repair or replace as necessary and go to VERIFICATION VEHICLE REPAIR  procedure.

    NO

    1. Go to W/ HARNESS INSPECTION  procedure
scientia non olet · About LEMON Manuals