LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Veloster Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Dual Clutch Transmission Control System) >> Inhibitor Switch >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is the reverse of removal.
    NOTE:
    • Fix the inhibitor manual control lever in the N jig hole when you assemble the shift cable.
    • Adjust the shift cable after you install the inhibitor switch.

      (Refer to the SHIFT LEVER  .

scientia non olet · About LEMON Manuals