LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2012 >> Tucson GL, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control Switch >> Repair Procedures >> Inspection >> Measuring Resistance

Measuring Resistance

  1. Disconnect the cruise control switch connector from the control switch.
    Fig 1: Identifying Cruise Control Switch Connector Terminals
    G06874327Courtesy of HYUNDAI MOTOR CO.
  2. Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).
    Function switch Terminal Resistance
    CANCEL 6 - 7 0 Ω ± 1%
    SET/- 6 - 7 220 Ω ± 1%
    RES/+ 6 - 7 910 Ω ± 1%
    ON/OFF 7 - 8 3900 Ω ± 1%
  3. If not within specification, replace switch.
scientia non olet · About LEMON Manuals