LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Accent GL >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer System >> Immobilizer Control Unit >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel (A) after removing side cover. (Refer to "CRASH PAD ")
    Fig 1: Identifying Crash Pad Lower Panel
    G06880262Courtesy of HYUNDAI MOTOR CO.
  3. Disconnect the 5P connector of the SMARTRA unit and then remove the SMARTRA unit (A) mounted on the left side cowl cross bar. after loosening a shear bolt (B).
    Fig 2: Identifying SMARTRA Unit And Shear Bolt
    G06880263Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals