LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Elantra SE >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> SRS Control Module & Sensors >> SRS Control Module (SRSCM) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Remove ignition key from the vehicle.
  2. Disconnect the negative (-) cable from battery and wait for at least three minutes.
  3. Disconnect the DAB, PAB, SAB, CAB and BPT connectors.
  4. Remove the floor console. (Refer to FLOOR CONSOLE REPLACEMENT )
  5. Press the lock (1), then pull back the connector lever (2) until it clicks.
    Fig 1: Pulling Connector Lever
    G06863822Courtesy of HYUNDAI MOTOR CO.
  6. Disconnect the SRSCM harness connector (A) and (B) from the SRSCM.
  7. Remove the SRSCM mounting nuts (3EA) from the SRSCM, then remove the SRSCM.
    Fig 2: Identifying SRSCM
    G06863823Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals