LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2006 >> Tiburon SE >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Inspection >> Brake Switch Test

Brake Switch Test

  1. Disconnect the connector from the brake switch.
  2. Remove the brake switch.
    3. Fig 1: Disconnecting Connector From Brake Switch
    G03849073Courtesy of HYUNDAI MOTOR CO.
  3. Check for continuity between the terminals according to the table.
    Fig 2: Continuity Condition Chart
    G03849074Courtesy of HYUNDAI MOTOR CO.
  4. If necessary, replace the switch or adjust the pedal height.
scientia non olet · About LEMON Manuals