LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2006 >> Accent Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle System (A4AF3)) >> Automatic Transaxle System >> DTC P0711 Transaxle Fluid Temperature Sensor Rationality >> Monitor SCANTOOL Data

Monitor SCANTOOL Data

WARNING: This page is about a different variant/trim than selected.
  1. Connect scantool to data link connector(DLC).
  2. Engine "ON".
  3. Monitor the "TRANSAXLE FLUID TEMPERATURE SENSOR" parameter on the scan tool.

    Specification: Increasing gradually with increase in temperature

    Fig 1: Scan Tool Display - Transaxle Fluid Temperature Sensor
    G04802073Courtesy of HYUNDAI MOTOR CO.
  4. Does "TRANSAXLE FLUID TEMPERATURE SENSOR" follow the reference data?

    YES  : --> Fault is intermittent caused by poor contact in the sensor's and/or PCM's connector or was repaired and PCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO  : --> Go to "TERMINAL & CONNECTOR INSPECTION " procedure.

scientia non olet · About LEMON Manuals