Troubleshooting Procedures

First, select the applicable malfunction symptom from the TROUBLE SYMPTOM CHARTS .

Determine the condition of all function circuits.

• Make the following preliminary inspections.
  • Check that the installation of the actuator, accelerator cable are correct, and that the cables and links are securely connected.
  • Check that the accelerator pedal moves smoothly.
  • Adjust the cable so there is not excessive tension or excessive play on the accelerator cable.
  • Check that the actuator and unit assembly, cruise main, control switch and the connector of each cancel switch are connected securely.
• Check in the sequence indicated in the TROUBLE SYMPTOM CHARTS .
• If a normal condition is indicated, replace the cruise control module.