Cruise Control Systems: Adjustments: Inspection
- Turn A/C and all lights OFF, inspect and adjust at no load.
- Warm the engine until idle is stabilized. Confirm that the idle speed is at the specified RPM.
- Turn the ignition switch OFF.
- Confirm there are no sharp bends in the cables.
- Depress the accelerator pedal and check if the throttle lever moves smoothly from fully closed to fully open.
- Check the inner cables for correct slack.
- If there is too much slack or no slack, adjust the play by the following procedures:NOTE: If the cable is very loose, the loss of speed going uphill will be large. If the cable is too tight, idle RPM will be high.