Accent (Front & Rear Power Windows)
NOTE:
Power window main switch testing for XG300 is not available from manufacturer.
Remove power window main switch. Check continuity between specified terminals, with switch in specified position. See MAIN SWITCH CONTINUITY - FRONT & REAR POWER WINDOWS (ACCENT) table. See Fig 1. If continuity is not as specified, replace main switch.
MAIN SWITCH CONTINUITY - FRONT & REAR POWER WINDOWS (ACCENT)
| Switch Position | Continuity Between Terminals No. | |||
|---|---|---|---|---|
| Right Front | ||||
| Up | 1 & 13; 3 & 8 | |||
| Off | 1, 3 & 8 | |||
| Down | 1 & 8; 3 & 13 | |||
| Left Front | ||||
| Up | 4 & 13; 6 & 8 | |||
| Off | 4, 6 & 8 | |||
| Down | 4 & 8; 6 & 13 | |||
| Right Rear | ||||
| Up | 7 & 13; 8 & 9 | |||
| Off | 7, 8 & 9 | |||
| Down | 7 & 8; 9 & 13 | |||
| Left Rear | ||||
| Up | 8 & 14; 12 & 13 | |||
| Off | 8, 12 & 14 | |||
| Down | 8 & 12; 13 & 14 | |||
| Lock Switch | ||||
| Lock | (1) | |||
| Unlock | 10 & 13 | |||
|
||||