Clutch Assembly: Inspection
- Check clutch cover diaphragm spring end for wear and uneven height. Replace clutch cover if height difference is greater than .02" (.5 mm). Check pressure plate surface for wear, cracks and color change. Check for loose rivets. If any defects are found, replace clutch cover.
- Check disc facing for loose rivets, uneven contact, and oil or grease contamination. Rivet depth should be greater than .012" (.3 mm). Check torsion springs for damage. Ensure disc slides freely on transaxle input shaft. If any defects are found, replace clutch disc.
NOTE:
DO NOT reuse release fork spring pins.