LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Rear Suspension System) >> Repair Instructions >> Spring Shackle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rear Spring Hanger Bracket Bolts
    GM941646Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the shackle assembly to the spring.
  2. Install the shackle nut and bolt to the spring.

    Tighten:  Tighten the rear shackle nut to 85 N.m (63 lb ft).

  3. Install the shackle nut and bolt to the frame

    Tighten:  Tighten the shackle nut to 85 N.m (63 lb ft).

  4. Remove the rear axle support.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals