LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 616 (Power Steering System) >> Repair Instructions >> Power Steering Pump Flow Control Valve Replacement - Off Vehicle (Regular) >> Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Power Steering Pump Flow Control Valve Assembly & Pump Housing
    GM431058Courtesy of GENERAL MOTORS CORP.
  1. Drain the oil from the reservoir (1).
  2. Remove the control valve assembly (3) from the pump housing (1). Make sure the flow control spring (4) does not fall out of the pump housing (1).
  3. Remove the rectangular section seal (2) from the control valve assembly (3).
scientia non olet · About LEMON Manuals