LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 616 (Power Steering System) >> Repair Instructions >> Power Steering Gear Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the hoses from the steering gear.
  2. Disconnect the intermediate shaft from the steering gear. Refer to Intermediate Steering Shaft Replacement - Lower in Steering Wheel and Column.
    3. Fig 1: Power Steering Gear
    GM793263Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Power Steering Hose Disconnected Notice in Cautions and Notices.
  3. Raise the vehicle. Support the vehicle with suitable safety stands.
  4. Remove the engine protection shield. Refer to Engine Protection Shield Replacement in Frame and Underbody.
  5. Remove the pitman arm from the steering gear. Refer to Pitman Arm Replacement in Steering Linkage.
  6. Remove the bolts retaining the steering gear to the frame.
  7. Remove the steering gear from the vehicle.
scientia non olet · About LEMON Manuals