Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Isolators

Courtesy of GENERAL MOTORS CORP.

Install the isolators (2).
Install the mounting bolts (3).

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the mounting nuts (1).
Tighten: Tighten the nuts to 25 N.m (18 lb ft).
Install the compressor. Refer to Compressor Automatic Level Control Replacement
Install the compressor assembly to the vehicle. Refer to Compressor Assembly Automatic Level Control Air Replacement .