LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 585 (Air Suspension) >> Repair Instructions >> Compressor Automatic Level Control Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do NOT remove an air supply pipe in an attempt to depressurize the air suspension. Always follow the Air Suspension Depressurization Procedure in Air Suspension. Failure to follow this procedure may cause personal injury or damage to the vehicle.
  1. Remove the compressor assembly from the vehicle and place on a bench. Refer to Compressor Assembly Automatic Level Control Air Replacement .
    2. Fig 1: View Of Compressor
    GM1234288Courtesy of GENERAL MOTORS CORP.
  2. Disconnect all electrical connections (2, 3).
  3. Remove connector (3) from the mounting bracket.
  4. Remove the mounting nuts (1).
  5. Remove the compressor.
scientia non olet · About LEMON Manuals