Installation Procedure
WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
- With an assistant, align the door to the vehicle and install the fastener (1) that retains the door hinge halves together.
Tighten: Tighten the fastener to 9 N.m (7 lb ft).
- Transfer components as necessary.
- Install the fasteners that retain the door check link to the body. Refer to Door Check Link Replacement .
- Install the wiring harness. Refer to Wiring Harness Replacement - Front Door .
- Install the water deflector. Refer to Water Deflector Replacement - Front Door .
- Install the door trim panel. Refer to Trim Panel Replacement - Side Front Door .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.