LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2014 >> Fit >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Abs (Anti-Lock Brake System)) >> Wheel Speed Sensor Replacement >> Rear

Wheel Speed Sensor Replacement: Rear

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to LOCK (0).
  2. Pull back the carpet under the rear seat, then disconnect the wheel speed sensor connector (A).
    Fig 1: Identifying Wheel Speed Sensor Replacement Components (Rear) With Torque Specifications
    G05959264Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the grommet (B), the bracket (C), the clips (D), and the wire guide grommet (E).
  4. Remove the bolt and the wheel speed sensor (F).
  5. Install the wheel speed sensor in the reverse order of removal, and note these items:
    • Do not twist the sensor wires.
    • If the wheel speed sensor comes in contact with the hub bearing unit, it is faulty.
    • Make sure the grommet is installed properly.
scientia non olet · About LEMON Manuals